SERVER SIDE
Please use the IP Phone Profiles to create a profile and load into your phone.
Directions for Sipura 2000 device follow, please replace name SPA941 but rest should be the same:
Logged in on the Reseller Enterprise Plan Main Menu, find
IP Phone Profiles
* Create profile of 'Sipura 2000' type, name "Sipura 2000"
* Enter other values:
System tab:
Admin password - to secure your device
Regional tab:
Choose your time zone
Line1 tab:
Proxy - replace 66.114.203.SIP_IP_HERE with your SIP instance IP address (see "Nodes" screen from PortaBilling main menu)
IP Phones Inventory
* Create inventory of 'Sipura 2000' type;
* Choose the profile "Sipura 2000" created in previous steps
* Enter encryption key "Your Name" (e.g. "John Doe")
* Put MAC address of your device in format 00:11:22:33:AA:BB, you can find it in the web interface of the Sipura in the "Product Information" section of the "Info" tab.
Accounts Page
* Under Account, choose the IP Phone and Port at 'Additional info' tab, than click IP phone, and choose Sipura 2000 profile which you just created.
Profile generation is performed hourly and after profile is changed if there are accounts using that profile.
DEVICE SIDE
* Go to IP Phone Web interface;
* Log in as admin and choose 'Administrator Login' and 'Advanced view';
* At 'Provisioning' tab:
set Provision Enable equal to Yes
set Resync on Reset equal to Yes
set Profile Rule:
[--key $B]http://66.114.240.218/$A/$MA.cfg (this varies from server to server)
* save the changes.
To force device to reload profile, you may turn the device off and then back on. Note that at least an hour should pass after making any changes to the profile in the web interface.
